Echoflex Installation Guide
Preset Station
Installing the Faceplate
The faceplate is secured to the station with two magnets that are located on
the bottom edge of the faceplate.
1.
Align the top of the faceplate
approximately 20 degrees to the
station.
2.
Hook the top of the faceplate on
the tabs located on the top of the
station electronics assembly. To
ensure the faceplate is hooked
properly on the top hook, wiggle it
slightly side to side while the
bottom is angled 20 degrees from
the wall.
3.
Swing the bottom of the faceplate down until the magnets engage.
4.
If the faceplate does not fully attach, wiggle the bottom of the plate
until the magnets are seated properly to the station and the faceplate
is secure.
Elaho Preset Station
Page 6 of 8
Echoflex Solutions, Inc.
