Echoflex Installation Guide
Preset Station
Changing Button LED Color
Stations default to illuminating preset buttons in green. To change the color
of the LEDs at the station follow this procedure:
1.
Press and hold the [MODE] button for five seconds. The LED beneath
the [MODE] button will illuminate and all of the preset buttons will
display in their current configured color.
2.
Press the first preset button to cycle through the available colors until
the desired color is shown.
•
After 90 seconds of inactivity, the MODE status will timeout and
any changes will be aborted.
3.
Press and release the [MODE] button to save the setting. The station
preset buttons will shown their new selected color.
Preset Record
To record a preset to a button on the Preset Station:
1.
Set the desired lighting look in the space.
2.
Press and hold the preset button for three seconds. The preset is
recorded to the selected button. The button LED flashes four times to
confirm the record action.
Service
If you have any difficulties installing your system or with system startup
please contact Echoflex Technical Services. Echoflex contact information is
located at the bottom of
.
Elaho Preset Station
Page 8 of 8
Echoflex Solutions, Inc.