62
Source Four LED User Manual v1.8.0
Current DMX In
The Current DMX In screen displays the values of the current DMX input by channels. The values
dynamically change as the DMX input changes. This screen is a read-only screen, which displays the
following:
• The Control Input setting
• The DMX channel assignment, in order
• The current DMX value (0-255) of each control channel in use by the fixture
• The current brightness (0 to full or 00 to FL) of each series of LEDs in the fixture’s LED array
1:
On the Diagnostics screen, scroll to Current DMX In.
2:
Press [
].
Figure-4.32 Current DMX In screen with dynamic values
3:
Press [
] or [
] to scroll through the channels. Arrows on the left indicate that you can scroll
up or down.
4:
Press [
] to return to the Diagnostics screen.
Network Statistics
The Network Statistics screen displays the statistics of the network. The DMX input values dynamically
change. This screen is read-only.
1:
On the Diagnostics screen, scroll to Network Statistics.
2:
Press [
].
When you access the screen, the dynamic values start at 0 and continue to increase.
Figure-4.33 Network
Statistics screen with dynamic values
3:
To reset the counters, press [
].
4:
Press [
] to return to the Diagnostics screen.
Current DMX In
DMX Ch
Level
2
107
3
14
4
82
5
0
G O R A O R I
11 02 00 10 00 00 01
DMX channel
DMX value
Brightness
LED series
Diagnostics
Breaks: 15490
Network Statistics
Overruns: 0
Received: 47835
Bad Starts:
0
DMX Starts:
27120
RDM Starts:
0