8
Source Four LED User Manual v1.8.0
Set DMX Address
1:
From the main screen, press [
] to open the Main Menu.
2:
On the Main Menu, scroll to DMX Start Address and then press [
].
3:
Use [
] or [
] to scroll to the desired address.
4:
Press [
] to select the address number.
5:
Press [
] to return to the home screen.
A DMX address is not required if using stand-alone or master/slave control.
Install Soft Focus Diffuser
1:
Install the Soft Focus diffuser into an A-Sized Pattern holder.
2:
Insert the Pattern holder and diffuser into the Pattern holder slot, making sure the writing on the
diffuser faces away from the Light engine.
For more information, see
Install a Soft Focus Diffuser
on
page 18
.
Use Quick Color (Excluding Daylight and Tungsten)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This feature
overrides any presets or sequences previously selected and is only available when there is no external
DMX signal to the fixture. For a list of available colors, see
Color Mixes
on
page 27
.
1:
Scroll to Quick Color within the Presets and Sequences screen.
2:
Press [
].
3:
Scroll to Color and press [
].
4:
Press [
] or [
] to select the desired color
5:
Press [
] to commit the selection.
6:
Scroll to Intensity and press [
].
7:
Press and hold [
] or [
] to adjust the fixture’s intensity.
8:
Press [
] to commit the selection.
• To set the Intensity to 0, press [
]. Pressing [
] a second time will return the fixture to its
previously set intensity.
• If power to the fixture is lost while in Quick Color mode, the fixture will return to the Quick
Color menu when power is restored.
Use Quick Setups
Various pre-programmed combinations of operational settings are available to quickly get you started.
These settings are specifically created for different situations and are easily accessible on the fixture’s
user interface. Individual settings within each quick setup can be accessed via the Advanced menu in
order to take advantage of all the possible control features.
Note:
Exiting the Quick Color menu will return the fixture to the state it was in prior to
entering the menu.