38
Source Four LED User Manual v1.8.0
Status (Home) Screens
The status (home) screens display when you press [
] or when there is no activity for a specific time,
which you set in Local Settings. For more information, see
Local Settings
on
page 65
. The home screens
display the status of multiple fixture settings. These may or may not include:
• Quick Setup
• Input settings
• DMX address
• LED settings
• Preset or Sequence that may be active
• Master or Slave status, when applicable
• Diagnostic messages
• DMX signal status
• Software version
Most of the settings can be adjusted either on the home screen or within a short series of menus.
When a quick setup is selected, the settings of the setup are displayed on the home screen.
For more information about status screens, see
Home Screen Displays
on
page 40
.
Figure-3.5 Examples of status screens
Display Title
A menu’s title appears in the first row of every display for easy navigation.
Input Settings
Displays the parameters for the Quick Setup that is active. For more information, see
Home Screen
Displays
on
page 40
.
DMX Address
Indicates the DMX address when the fixture is receiving DMX. For more information, see
DMX Start
Address
on
page 41
.
Stage
HSI Reg Incd RS ––
Power Budgeting 75%
001
Error!
11/15 +7 Amber Adj
XT Arch
Master
Step 4: Preset 3
3/15 Saturation
Sequence 5 Active
8Ch Reg Stnd RS Strb
Error!
Overtemp Activated
DMX address
Input settings
System message area
Status bar
Display title