ETC Cyberlight LED, Руководство пользователя

Страница: 8 / 48

3 Cyberlight LED User Manual
Safety Considerations
To ensure safe operation, follow the safety instructions and warning notes in the user manual.
•
The Cyberlight LED is intended for professional use only. Not for residential use. Read the
entire manual before using this equipment.
•
Contact your authorized ETC dealer or Technical Services before performing any service in
order to maintain warranty coverage.
Symbols used on the product label are defined below:
1 m
The luminaire must be installed at least 1.0 m (3 ft
4 in) away from all lighted objects. Le luminaire doit être installé à au moins 1,0 m
(3 pi. 4 po.) de tout objet éclairé.
General warning Avertissement général
Do not stare at the operating light source.
Ne pas regarder la source de lumière lorsqu’elle
fonctionne.
This product should not be discarded as unsorted
waste but must be sent to separate collection
facilities for recovery and recycling.
Ce produit ne doit pas être jeté avec les déchets
ménagers mais doit être déposé dans une collecte
de déchets électroniques ou dans un point de
collecte.
t
a
or T
a
Rated maximum ambient temperature Température ambiante maximale recommandée
Operate indoors only, not where this product
would be exposed to the weather. Ne fonctionne qu'à l'intérieur, pas là où ce produit
serait exposé aux intempéries.
WARNING:
Note the following safety warnings before use:
•
This equipment is designed for operation by qualified personnel only.
•
Do not stare at the operating lamp. May be harmful to the eyes.
•
Replace fuses with the specified type and rating only. See
page 41
.
•
Make sure that the available voltage is within the stated range. See
page
9 .
•
Do not use this fixture with a damaged power lead (cord set). If the lead
is damaged, it must be replaced by a qualified technician with an
equivalent type before use. Contact your local authorized dealer for
spare power leads.
•
Do not mount the fixture on or near flammable surfaces.
•
The fixture should be positioned so that prolonged staring into the
fixture at a distance closer than 6.4 m (21 ft) is not expected.
•
Minimum distance from fixture head to combustible materials: 0.1 m (4
in).
•
Minimum distance to lighted objects: 1.0 m (3 ft 4 in).