Replace a Gobo
30
4. Remove the gobo from the gobo carrier.
a. Use a flatblade jeweler's screwdriver to carefully pry the spring out of the gobo carrier.
b. Remove the gobo media from the gobo carrier.
5. Identify the reflective side of the new gobo. The reflective side must be oriented in the
gobo carrier so that when the effects module is installed in the fixture, the reflective side is
toward the LED engine.
Front
Lens
Non-reflective
Side
LED
Engine
Gobo Material
Gobo Carrier
(Gobo Wheel 1)
Reflective/
Coated Side
Gobo Carrier
(Gobo Wheel 2)
6. Insert the new gobo into the gobo carrier.
a. Verify that the reflective side of the gobo is correctly oriented with the reflective side up
(if installing in gobo wheel 1) or down (if installing in gobo wheel 2).
b. Align the alignment tab on the gobo with the notch in the gobo carrier.
