ETC 7121A1212, Руководство пользователя, Страница: 22 / 32

18 ColorSource ThruPower User Manual
About
Test menu
The Test menu is a tool for testing dimmers and loads. In the absence of a DMX control
source, the test menu may also be used to set dimmer levels to snapshot a preset.
Enter the Test menu
From any menu, press the [Test] button.
Set dimmer levels in the Test menu
For testing, you can set all dimmers to the same level, or set dimmers individually or in groups
to different levels.
To set all dimmers to the same level:
Step 1: In the "Dimmer" menu option, all dimmers are selected by default, either "1
thru 12" or "1 thru 24", depending on the ColorSource model.
Step 2: In the "Level" menu uption, "100%" is set by default. To change the level, press
the
[Enter] (

) button and then the [Increase] (+) or [Decrease] (–) button.
When finished, press the [Enter] (

) button.
Step 3: In the "Set" menu option, press the [Enter] (

) button. This activates the
dimmers you chose, at the level you selected. This can be verified on the Home
screen, by pressing the
[Home] (<<) button.
About
Version 1.0.0.0.0.13
DimEng 1.0.0.2
RDM ID 6874:ABCDE00F
Serial 4500000123
Triac Board 1 12
Triac Board 2 -
Version
Displays the current software version.
DimEng (Dimming Engine)
Displays the current Dimming Engine version.
RDM ID
Displays the ID of the current RDM device
connected
Serial
Displays the serial number
Triac Board 1 and 2
Displays the version number, or a dash if not found.
Test
Dimmer 1 thru 24
Level 100%
Set
Release All