Etatron DLX pH-RX-CL Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 43 / 60

• 39 •
Using + and - it's possible to set the delay time, from 0 second to 99 min
Thanks to this function user can select the time the pump will use to quit from calibration phase setting to come back to the main
measuring display.
7.1.6 - Calibration exit delay
to confirm.
59 sec. To shift from minutes to seconds, press Right arrow, press OK
Using + and - it's possible to set the delay time, from 0 to 99 min.
To solve the problem of inertia of some electrodes or plant installation, the pump has the possibility to set a delay time from pump
switching-on to the measuring and control moment.
7.1.7 - Switching-on delay
59 sec. To shift from minutes to second press Right arrow .
Press OK to confirm.
ENGLISH