Etatron DLX pH-RX-CL Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 40 / 60

• 36 •
7.0 - PROGRAMMING
Through the front panel it is possible to set and to modify all the working parameters of operating setting of the
pump.
Menu Setup
The first operation to do is to select the type of parameter (pH, Redox or free Chlorine) that is intends to measure and
to control.
+ and - buttons and to confirm through the OK button.
The pump has turned on, on display it appear software revision
then the type of controlled parameter that it flashes (default
settings: pH - menu BASE).
In this phase it is possible to set measure type by means on the
After confirm with the OK button the measure's type, the pump
goes in measure mode, on display will show the measure's value.
Press OK button to enter in menus; the first is SETPOINT menu, using
+ and - buttons you will scroll all 4 menus.
7.1 - PUMP SETUP
Setpoint menu
Calibration menu
Alarm menu