ETAS
Hardware Description
ES582.1 - User’s Guide
11
3
Hardware Description
This chapter contains information about the following topics:
• “Overview” on page 11
• “Application Areas” on page 12
• “Properties” on page 12
• “Interfaces” on page 13
• “Power Supply” on page 15
• “Display of Operating State” on page 15
• “Update of the Firmware” on page 16
3.1
Overview
The ES582.1 CAN FD Bus Interface USB Module is part of the family of com
-
pact ETAS bus interface modules. It is equipped with two CAN/CAN FD inter
-
faces for connection to the CAN bus of a vehicle or an ECU as well as with a
USB port for the connection with a PC or a drive recorder.
Fig. 3
-
1
ES582.1
The ES582.1 modules supports CAN FD (CAN Flexible Data Rate) and is suit
-
able for numerous applications in the classic CAN as well as in the CAN FD
environment.
In conjunction with the application software INCA and ODX LINK from ETAS,
the ES582.1 enables access to the CAN bus for measurement, calibration and
diagnostics.
With the diagnostics service interface, the ES582.1 can be connected with the
CAN bus of a vehicle.
When validating the vehicle diagnostics, the module can be used together with
ODX LINK, the INCA add-on for ECU diagnostics, as interface for OBD-on-CAN
as well as for reading and deleting diagnostics error codes (DTCs). A separate
diagnostics service tool is not required in these cases.
The ES582.1 module offers an open SAE J2534-compliant pass-thru interface
for the vehicle diagnostics and flash programming.