ETAS ES5095.1, Руководство пользователя

Страница: 14 / 26

ES5095.1 Break-Out-Panel (80-CH) - User’s Guide 14
Design and Installation ETAS
2.2 Installation
The ES5095.1 is provided for assembly in a 19” rack.
The cables must be secured to the perforated rail on the back of the ES5095.1
for strain relief. If necessary, cable shielding can be fitted on top of this. The
perforated rail has an electrical connection to the housing ground.
The installation of the ES5095.1 may be performed only by trained personnel in
an ESD-safe area.
2.3 Scope of Supply
The scope of delivery of the ES5095.1 Break-Out-Panel includes the assembly
described in Chapter 2.1, including the short circuit bar.
The bolts and cage nuts for assembly in a 19” rack as well as the picoMAX
female multipoint connectors are not included in the scope of delivery.
CAUTION!
Some components of the ES5095.1 may be damaged or destroyed by
electrostatic discharges. Leave the break-out panel in its transport
packaging until installation. The ES5095.1 must only be removed
from the transport packaging, configured and installed at a work-
place that is secured against electrostatic discharges. Avoid any con-
tact with the connections of the ES5095.1 or with conductor paths
on the card.
CAUTION!
Do not install the ES5095.1 while the ETAS LABCAR is switched on.
First, switch off the ES5300.1-A housing or the ES5300.1-B housing
by shutting down the real-time PC and by activating the On/Off
switch at the rear.
WARNING!
Danger of overheating and fire caused by exceeding the specified val-
ues.
Make sure that the product is only operated in the specified range.