ETAS ES5095.1, Руководство пользователя

Страница: 13 / 26

ES5095.1 Break-Out-Panel (80-CH) - User’s Guide 13
ETAS Design and Installation
2 Design and Installation
2.1 Design
The ES5095.1 Break-Out-Panel (see Fig. 2-1) consists of a front panel to which
two PCBs are attached. The short circuit bars are attached to the front panel from
the front.
The perforated rail attached to the rear is used for mechanical strain relief of the
cables. It is also used to support cable shielding and contributes to the mechani-
cal stability of the complete assembly.
10-pin picoMAX pin strips are located on the back of the PCB. Corresponding
picoMAX female multipoint connectors can be connected to these (see Chapter
"Connectors" on page 15).
Fig. 2-1 Side View
Fig. 2-2 Top View
Note
The perforated rail improves the mechanical stability of the ES5095.1 and
therefore should not be removed.