ES31x.1 User’s Guide
16
Hardware Description
ETAS
4.2
Properties
• 4 respectively 8 electrically isolated A/D channels, separately configurable
• Measure range from 100 mV to 60 V
• Sample rate from 1 Hz to 2,000 kHz (measuring and calibrating)
• Adjustable short circuit-proof sensor supply voltage (2.5 V to 15 V)
The complete technical data of the ES313.1 and ES314.1 is located in chapter 8
on page 40.
4.3
Housing
The ES31x utilizes a robust metal housing with connections at the front of the
unit. The ES31x is designed for installation in the engine compartment.
The housings of the ES300 series can be connected with each other quickly and
easily to form a measuring system (see chapter 6 on page 25). In the vehicle or in
the lab, the modules can be screwed directly onto a carrier system without much
effort or fastened with cable ties.
These simple and uncomplicated fastening options allow for a flexible assembly
of the modules. On top of that, a high degree of availability of the fastening
options is also given under rough harsh ambient conditions (salt mist, dirt).
CAUTION!
Loss of Properties after IP67!
Do not open or change the module housing!
Work on the module housing may only be performed by ETAS.