ETAS BR XETK-S2.0, Руководство пользователя

Страница: 38 / 78

ETAS Technical Data
BR_XETK-S2.0 - User Guide 38
7.4 Automotive Ethernet Interface
7.5 Environmental Conditions
7.6 Test Characteristics
1)
Delay of ECU reset through the BR_XETK - S2.0 without transferring the FPGA
(U
Batt
present, VDDP will be switched on)
2)
max. delay of ECU reset through the BR_XETK - S2.0 (U
Batt
and VDDP will be
switched on)
Item Characteristics
Connection Automotive Ethernet 100BASE-T1
Protocol XCP on TCP/IP or UDP/IP
IP address Dynamic (standard, for INCA) or static
(e.g. for Rapid Prototyping) by using
the XETK Configuration Tool (default
IP
address: 192.168.40.16)
Cable length max. 15 m
Ethernet Interface DC decoupling
NOTE
The Automotive Ethernet interface is not compatible with the standard Ether -
net interfaces of ETAS modules. A CBEB10x.1 Media Converter or an ES88x
ECU Interface Module is needed to connect the BR_XETK
- S2.0 to the PC.
NOTE
To ensure successful initialization of the network card of your PC, refer to
chapter 7.1.2 on
page 34
Item Characteristics
Temperature range (operation) - 40 °C to +110 °C
- 40 °F to +230 °F
Parameter Symbol Condition Min Typ Max Unit
Reset delay 1
1)
t
Reset1
U
Batt
= 12 V,
ECU_VDDP =
0 V  3.3 V/5.0 V
without transferring
FPGA
29 40 ms
Reset delay 2
2)
t
Reset2
U
Batt
= 0 V  12 V
transfer FPGA
200 340 ms