ETAS BR XETK-S2.0, Руководство пользователя

Страница: 34 / 78

ETAS Technical Data
BR_XETK-S2.0 - User Guide 34
7 Technical Data
This chapter contains information about following topics:
• “System Requirements” on page 34
• “Data Emulation and Measurement Memory” on page 37
• “Configuration” on page 37
• “Automotive Ethernet Interface” on page 38
• “Environmental Conditions” on page 38
• “Test Characteristics” on page 38
• “Power Supply” on page 39
• “JTAG Timing Characteristics” on page 40
• “Electrical Characteristics” on page 41
• “Pin Assignment” on page 44
• “Mechanical Dimensions” on page 46
7.1 System Requirements
7.1.1 Compatible Hardware
• ES882.1 ECU Interface Module
• ES886.x ECU Interface Module
• CBEB100.1 Media Converter
• ES16x Media Converter for Gigabit Automotive Ethernet
7.1.2 PC with one Ethernet interface
A PC with one open Ethernet interface (1 Gbit/s or 100 Mbit/s, full duplex) with
RJ45 connection is required. Ethernet interfaces that are implemented with an
additional network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful initialization of the module
NOTE
Half Duplex mode and Half Duplex Ethernet interfaces are not supported.
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!