Etaluma LS460, Руководство для стартапов

Страница: 9 / 29

LS Microscope Startup Manual 2018.7.25
9
II. Software: Getting Started with Lumaview
The following sections give instructions for getting started with Lumaview on the LS720, LS620, LS560 and
LS460 and are intended as a Startup Manual only. Not all options are given and not all features may be
explained in any particular section. The complete User Guide for Lumaview is contained in the Help Section
after Lumaview is opened. Click on Help in the Title Bar to open the pulldown menu and click Contents, or
simply Click F1 to open the Help Section.
Becoming familiar with the complete Help Section is a must for
using LS Microscopes optimally and taking advantage of the many features of these Microscopes and
accompanying software.
A. Starting Conditions
1. Lumaview has been downloaded and installed on the computer.
2. The LS Microscope is connected to the computer via the UBS cable.
3. LS620, LS560, or LS460 : Sample to be imaged is present on the LS Microscope stage.
4. LS620 or LS560 : Fluorescence shroud is over sample if imaging involves fluorescence.
5. LS720: Red shipping lock MUST be off, power cable is plugged into a standard AC outlet, and fluorescence
shroud is available if imaging involves fluorescence.
B. Launching Lumaview
1. Launch the Lumaview software from the desktop icon (or other chosen location) and allow the LS
Microscope to be discovered. This may take a minute or so the first time. Two windows will open on
your monitor:
a.
Live Image Window inside the larger Main Window. “Live Image Window” will be in the title bar
when the Window is not maximized. When Live Image Window is maximized, [Live Image
Window] transfers to the end of the Main Window title bar.
The Live Image Window status bar at the bottom shows communication with the camera sensor
via continuous display of several useful metrics: current frame rate, data transfer rate, number of
frames collected thus far in the session, frame size, and session date and time start.
b.
Main Window with Lumaview v(version number) in the title bar. When Live Image Window is
maximized, the title bar becomes Lumaview v(version number) – [Live Image Window].
Note: If Live Image Window is not present, there is likely a Driver issue. Follow procedure on
Driver Resolution in Appendix D.
2. The Live Image Window includes a Left Toolbar with the maximum following commands:
a. Manual Image
b. Manual XYZ ( LS720 only )
c. Snap Image
d. Composite (
LS720 and LS620 only
)
e. Video Record (toggles on and off)
f. Protocol
g. Zoom