7
Molift MRS Duo Flex / www.etac.com
How to use MRS Duo Flex
Adjusting telescope boom
Easy to adjust width without tools. Loosen the
locking handle, slide boom to wanted position,
then tighten handle.
Remember to tighten the locking
handle when the boom is adjusted
Adjusting heights of post
1.
2.
3.
4.
Instant height adjustment (gas spring mecha-
nism). A simple user guide is placed above the
handle.
1. To adjust the height, loosen the height
adjustment handle. Turn the handle counterc-
lockwise until a faint click is heard.
2. Pull out the handle and adjust the height to
desired position.
3. When the handle is released it is important
that there will be a clear click to ensure that
the height is adjusted and thus locked.
4. Tighten the adjusting handle by turning it
clockwise.
Don`t stand under boom when adjust-
ing post height
Castors
Two sets of castors with brakes. Simply step on
the pedal to activate the brake.
Lifting user
1. Make sure the floor is level.
2. Place the gantry straight above the user.
3. Make sure that all four brakes are activated.
4. Read the user manual for Molift Air or Nomad
before lifting user.
Never leave a user unattended in a
lifting situation.
Never lift the user higher than
necessary to carry out a lift.
Transport and storage
The lifter can be stored and transported under
temperatures between -25 - 70 °C and Relative
Humidity between 15 - 93 %.
Содержание molift MRS Duo Flex
Страница 2: ......
Страница 104: ...Etac A S Parallelvej 3 DK 8751 Gedved www etac com...