6
Molift MRS Duo Flex / www.etac.com
Assembly
Supplied parts
1
2
3 4 5
6
7
8
MRS Duo Flex
User manual
BM21099 Rev B 2015-05-28
1 Telescopic boom
1x
5 Allen key 4mm
1x
2 Post
2x
6 DIN 912 M5x12
2x
3 Allen key 6mm
1x
7 Base
2x
4 Allen key 5mm
1x
8 User manual
1x
Make sure the following parts are included in the
package.
Beware of sharp edges at the ends
of the boom.
Mounting telescopic boom
1. Place the column on the floor with the 2 holes
facing sideward.
2. Place the boom between the columns.
3. Connect the columns with the boom and
tighten the 2 screws (M10).
4. Repeat the procedure at the opposite side.
Ensure that the joint is stable,
otherwise the 2 post system will be
unstable and not safe to use
Mounting base
1. Lift the column slightly and connect the base.
2. Tighten the 4 screws (M8) under the base.
3. Repeat the procedure at the opposite side.
4. Raise the MRS Duo Flex to an upright position.
It can be an advantage to lock the castors.
Ensure that the joint is stable,
otherwise the 2 post system will be
unstable and not safe to use
Mounting charger to column
1. Fasten lover screw first (M5).
2. Place charger on screw and insert upper screw
(M5).
3. Use allen key and tighten bolt.
Upper screw
Lower screw
Содержание molift MRS Duo Flex
Страница 2: ......
Страница 104: ...Etac A S Parallelvej 3 DK 8751 Gedved www etac com...