eta x472, Руководство пользователя, Страница: 24 / 48

24
GB
/ 44
II. EQUIPMENT AND ACCESSORY OF ETA VACUUM CLEANERS - LINE x472 (pic. 1)
A – vacuum cleaner
A1 – suction space lid A8 - handle
A2 – lid arrest closure A9 - safety feature
A3 – suction opening A10 – container/filter arrest closure
A4 – START/STOP button A11 – back cover (grid)
A5 – supply cord winding button A12 – exhaust HEPA micro filter
A6 – el. motor regulation A13 – supply cord
A7 – container/filter fullness signalisation A14 – parking opening (pressing)
B – dust container
B1 – handle B4 – foam micro filter
B2 – bottom arrest button B5 – HEPA filter
B3 – removable bottom B6 - separator
C – delimiting cassette
D – dust filter
E – cassette (grid)
E1 – suction micro filter
F – accessory
F1 – floor nozzle
F2 – suction hose with handle
F3 – suction tubes
G – accessory
G1 – cushion nozzle G4 – TURBO nozzle (ETA1472)
G2 – joint brush G5 – parket nozzle (ETA1472)
G3 – slit nozzle
III. PREPARING THE VACUUM CLEANER
Hose
– Connect the hose F2 to the vacuum cleaner by inserting the end piece to the suction vent
A3 to the maximum position (Fig. 6). You will hear a clicking sound.
– Disconnect the hose by pressing the button on the end piece and pull the hose out
slightly.
Telescopic tube
– You can connect the tube F3 with the hose handle F2 by slight pushing the handle to the
tube (Fig. 5).
– You can disconnect the tube by slight pulling of the handle out of the tube.
– The telescopic tube allows setting the suitable length according to your figure. Press the
lock pin in the direction of the arrow and pull out or push in the required length of the tube
(Fig. 7). When you release the lock pin, the tube length is fixed. In pulling out, keep the
tube in the safe distance from your face as the tube is very long.
Floor nozzle, TURBO nozzle
– When connecting and disconnecting accessory ( F1 , G4, G5 ) proceed in a similar way as
with a nozzle (pic. 4). Slit / cushion nozzle, joint brush
– When connecting and disconnecting accessory ( G1 , G2 , G3 ) proceed in a similar way as
with a nozzle (pic. 5).