Problem
Cause
Solution
Iron is not
heated.
Power supply not connected
Check the cord, plug and the socket
Thermostat regulation wheel is in MIN
position
Set the wheel to position • / •• / ••• or MAX
Automatic disconnection is activated or
the boiler is not turned on
Press steam control
A4
or button
B1
Iron does not
create steam
There is no water in the container
Pour water into the container
The water tank is not inserted in the
boiler properly
Insert the water tank in the boiler properly
Steam generation is not activated
Press button
B2
,
B3
or
B4
according to the
required steam level
The boiler temperature is not sufficient
for steam generation
Wait until the indicator of the relevant
button switches on
The steam button (control) is not
pressed
Press and hold button
A4
(control)
Automatic disconnection is activated
Press steam control
A4
or button
B1
Water is
dripping from
the ironing plate
The thermostat control dial is set to a
position below the one dot symbol or
at the one dot symbol but indicator
B4
is lit
Set the thermostat control dial to a symbol
corresponding with the material to be ironed
and press the appropriate button (
B2
,
B3
or
B4
)
Water condensed in the steam inlet
hose because you are using steam for
the first time or you have not used it
for a longer period of time
Direct the iron away from the ironed
material and hold button
A4
until the iron
starts releasing steam
Flakes and
other impurities
are peeled off
the ironing plate
Contrary to recommendation undiluted
water is used with excessive hardness
>15 °N
Use water diluted with distilled water
Clean the boiler
Brown or white
fluid leaks from
the ironing plate
Unpermitted chemical preparations
were used to remove scale or there is a
large amount of scale in the boiler and
it needs to be cleaned.
Do not add any chemical agents into the
water container for removing scale
You use one of the types of water that
we do not recommend
Use only common clean drinking water for
filling in the container, or water diluted with
distilled water
Fibers from linen got into the holes in
the ironing plate and they are burning
there
Clean the appliance, or vacuum the cooled
plate delicately from time to time
V. TROUBLESHOOTING
34
GB
/ 58