– When ironing woollen fabrics, we recommend ironing on the back side of the fabric and you
can iron virgin wool through additional cloth. Velvet and similar fabrics can be ironed in one
direction (
you will prevent creation of glossy areas
).
– Steam ironing is not suitable for fabrics from synthetic and silk fibers (e.g.
acrylon, nylon,
polyamide or polyester
).
– We recommend using soft textile permeable base materials for steam ironing.
– Make sure that the ironed fabric is tensed up properly so that steam does not leak to the sides.
– For the ironing plate to remain smooth, protect it from direct contact with sharp metal
objects (e.g.
zip fasteners, buttons, snap buttons, decorative objects
).
Control
– Plug the power cord
M
to a socket. You will see the
STAND-BY
sign on the display,
thenthe iron is switched automatically to the stand-by regime.
– Set the selected program (i.e. the fabric material) using the buttons
H
. Press the button
+
repeatedly to you set the programmes from
SOFT
to
STEAM MAX
, which means you are
increasing the temperature. Press the button
–
repeatedly to you set the programmes from
STEAM MAX
to
SOFT
, which means you the are reducing temperature.
– The respective information is shown gradually on the display using signs and symbols (fig. 9).
– Increasing or reducing the temperature is signaled by a flashing symbol.
– Reaching the proper temperature is signaled by the symbols sign and a sound signal.
Sound signaling
– Every pushing of the buttons
+
/
–
(i.e. change of the program) = “1 short beep”.
– Reaching the temperature of the set program = “6 long beep”.
– Activation of the safety function AUTO-STOP = “6 beep”.
Ironing without steaming
Put the iron to the rest position (fig. 7). Set the button
D
(steaming), (fig. 5) do not turn ON,
(i.e. steaming off) or pour out water from the container
I
. Plug the power cord
M
to a socket.
Set the program on the display using buttons
H
according to the selected fabric material (Fig.
2). Reaching the required temperature is shown on the display and announced by sound
signaling.
WARNING
– When the temperature is increased from the cold state or if the temperature is set from
higher to lower, we recommend waiting for a while (see the information on the display
and listen for sound signalling) due to stabilization of the ironing plate
A
temperature.
!
Steam ironing
Hold the iron disconnected from power supply in your hand and lift off cover
C
to open the
filling container lid. Pour in water to container
I
using the enclosed cup
O
(Fig. 4) and close
the filling hole lid in the opposite direction.
Keep the position of the iron for pouring in
water
. Plug power cord
M
to a socket. Put the iron into the rest position (Fig. 7) and using
buttons
H
set one of the programs enabling steaming on the display (i.e.
STANDARD
or
STEAM MAX
). When you hear a sound signal (indicating reached selected temperature),
press button
PUMP
D
and signaling light will come on. Hold the iron in your hand and steam
starts automatic. Remove your hand from the handle, automatic creation of steam will stop
(more steam may be going out for a short time).
GB
25 / 47
