eta Compact 2297 90000, Инструкция по эксплуатации

Страница: 41 / 52

2) Press the “ START/STOP ” to power off, otherwise it will turn off within 1 minute.
E) RECALL THE RECORDS
1) When the monitor is off, please press the “MEM” to show the
average value of the latest three records. If the records are
less than three groups, it will display the latest record first.
2) Press the “ MEM ” or “ SET ” to get the record you want.
The current No. is No 2. The corresponding The corresponding
date is January 1st. time is 10:08.
The date and time of the record will
be shown alternately.
CAUTION
The most recent record (1) is shown first. Each new measurement is assigned to the first
(1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and
the last record (60) is dropped
F) DELETE THE RECORDS
If you did not get the correct measurement, you can delete all results by following
steps below.
1) Hold pressing “ MEM ” and “ SET ” at the same time for 3 seconds when the monitor
is in the memory recall mode ,the flash display will show „ dEL ALL“ .
2) Press “ SET ” to confirm deleting, the monitor will display “ dEL+ donE ” and then turn off.
3) If you don’t want to delete the records, press “ START/STOP ” to escape.
4) If there is no record, the display will show „ - - - “.
TIP
Although this appliance does not support direct pairing with smart applications, you
can still use our partner MedM BP application (available for both Android and iOS) for
a thorough record, browsing charts and measurement history, and last but not least,
measurement history export. After registration, you can enter each measurement manually
by clicking on the “+” on the app homepage.
V. TROUBLESHOOTING OF POSSIBLE PROBLEMS
This section includes a list of error messages and frequently asked questions for
problems you may encounter with your blood pressure monitor. If the products not
operating as you think it should, check here before arranging for servicing.
41
GB
/ 47