eta 7153, Руководство пользователя

Страница: 22 / 44

IV. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord out of the
socket! Clean the kettle only when it is cooled down! Do not use rough and aggressive
detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)! The casing
of the electric kettle is made of top-quality glass and the heating bottom is made of top-quality
stainless steel, but in common use, impurities from water get stuck on them (water scale),
particularly above the heating element.
It is not rust or another material defect of the
kettle container.
Cleaning the kettle
Pour about 50 g citric acid to the kettle with the water scale sediment. Fill the kettle to about one
half and mix. After it dissolves, fill the kettle to 3/4 of the maximum amount of water. Place the
electric kettle on the stand and turn it on. Before boiling, turn off the kettle, let the solution take
effect for about 10 minutes and then pour it out. Clean the kettle thoroughly with clean water.
Repeat the whole procedure if the kettle is too soiled. Clean the electric kettle regularly!
Cleaning the sieve (A6)
Take the sieve from the kettle. Clean it from possible sediments in running water using
a fine brush. Then put the sieve back in the opposite way.
V. ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and accessories, as
well as their recycling, are on all the pieces if their dimensions enable it. The symbols on
the product or in the accompanying documentation mean that the used electric or electronic
products must not be disposed together with municipal wastes. Please, hand them over to
the collection points designed for their correct disposal, where they will be accepted free
of charge. By correct disposal of this product you can help to preserve valuable natural
resources and help to prevent possible negative impacts to the environment and to human
health, which could be the results of incorrect waste disposal. For further details ask the
municipal authorities or the nearest collecting point. Penalties can be charged for incorrect
disposal of such wastes, according to national regulations. If the appliance is to be put out
of operation definitely, we recommend cutting off the feeder cable, to disable its use.
Expert service must do the large maintenance or to intervene into inside parts of the
appliance!
Non-observance of the instructions of the manufacturer cancels the right for
guarantee repair!
VI. TECHNICAL DATA
Voltage (V) shown on the type label of the appliance
Absorbed power (W) shown on the type label of the appliance
Max. volume (l) 1.7
Protection class of the appliance I.
Weight (kg) approximately 1.2
Size of the product (mm) 160 x 220 x 220
Input in standby mode is < 1,00 W.
GB
22 / 37