eta 239490001E, Инструкция по эксплуатации

Страница: 117 / 164

EN
EN - 117
Problem Possible Causes What To Do
The dishes are
not clean
The dishes were not loaded
correctly.
See notes in “Loading the Dishwasher
Baskets“.
The programme was not
powerful enough.
Select a more intensive programme. See“
Wash Cycle Table „.
Not enough detergent was
dispensed.
Use more detergent, or change your
detergent.
Items are blocking the path of
spray arms.
Rearrange the items so that the spray can
rotate freely.
The filter combination in the
base of wash cabinet is not
clean or
is not correctly fitted. This may
cause the sp ay arm jets to get
blocked.
Clean and/or fit the filter combination
correctly.
Clean the sp ay arm jets. See „Cleaning
the Spray Arms“.
There are rust
stains on cutlery
The affected items are not corrosion resistant.
A programme was not run after
dishwasher salt was added.
Traces of salt have gotten into
the wash cycle.
Always run the quick wash programme
without any crockery in the dishwasher
and without selecting the Turbo function (if
present), after adding dishwasher salt.
The lid of the softer is loose Check the lip .Ensure the fix is fine.
Spots and filming
on glasses and
flatware
Extremely hard water
Low inlet temperature
Overloading the dishwasher
Improper loading
Old or damp powder detergent
Empty rinse agent dispenser
Incorrect dosage of detergent
To remove spots from glassware:
Take out all metal utensils out of the dishwasher.
Do not add detergent.
Choose the longest cycle.
Start the dishwasher and allow it to run for
about 18 to 22 minutes, then it will be in the
main wash.
Open the door to pour 2 cups of white
vinegar into
the bottom of the dishwasher.
Close the door and let the dishwasher com -
plete the cycle. If the vinegar does not work:
Repeat as above, except use 1/4 cup (60
ml)of citric acid crystals instead of vinegar.
Cloudiness
on glassware
Combination of soft water and
too much detergent
Use less detergent if you have soft water
and select a shortest cycle to wash the
glassware and to get them clean.
Yellow or brown
film on inside
surface
Tea or coffee stains
Using a solution of ½ cup of bleach and 3 cups
warm water to remove the stains by hand.
WARNING: You have to wait for 20 minutes
after a cycle to let the heating elements cool
down before cleaning interior; otherwise,
burns will happen.
Iron deposits in water can
cause an overall film
You have to call a water softener company
for a special filter.