eta 239490001E, Инструкция по эксплуатации

Страница: 114 / 164

EN
EN - 114
WHAT IS A SAFETY AQUASTOP HOSE?
It is a hose that prevents water from spilling into the area
around the dishwasher as it breaks.
The safety AQUAstop hose has double walls. The system
works by blocking the water supply to the AQUAstop hose at
the very beginning - behind the inlet faucet when the inner
hose is damaged and the space between the inlet hose and
the outer hose is being filled by water.
COLD WATER CONNECTION
If the water pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear. This precaution is needed to avoid the riskofthe
waterinlet to be blocked and damage the appliance.
DRAIN HOSE CONNECTION
• Insert the drain hose into a drain pipe with a minimum diameter of 40 mm, or let it run
into the sink, making sure to avoid bending or crimping it. Use the special plastic support.
• The free end of the hose must be at a height max. 1000 mm and must not be immersed
in water.
• Please hang up the drain hose either way of A, B.
HOW TO DRAIN EXCESS WATER FROM HOSES
• If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excesswater from hoses into a bowl
or suitable container that is held outside and lower than the sink.
WATER OUTLET
• Connect the water drain hose.
• The drain hose must be correctly fitted to avo id water leaks.
• Ensure that the water inlet hose is not kinked or squashed.
EXTENSION HOSE
• If you need a drain hose extension, observe to use a simil ar dr ain hose.
• It must be no longer than 4 metres; otherwise the cleaning effect of the dishw asher
could be reduced.