– Use the appliance only for the purpose it is intended for as specified in this manual.
Never use the appliance for any other purpose.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with
the manual) of the appliance.
– The manufacturer is not responsible for damage and injuries caused by improper use
of the appliance and the accessories (e.g.
food deterioration, injury, cutting
) and its
guarantee for the appliance does not apply in situations when the safety warnings above
are not complied with.
II. FEATURES OF THE DEVICE
(PIC. 1)
A – propulsion unit
A1 – on/off switch
A3 – supply cord
A2 – propulsion shaft
B – dish
B1 – seal
B2 – knife
C – lid
C1 – lid plug
C3 – seal
C2 – hanging loop container
D – Neoprene thermo for dish (600 ml)
The model you purchased includes the attachments and adaptors specified in the table:
Typ / Attachment
Bowl B
(600 ml)
Bowl B
(400 ml)
Lid
C
N
Neoprene
thermo D
ETA 010290000
√ (1 pcs)
√ (1 pcs)
√ (2 pcs)
√ (1 pcs)
ETA 010290010
ETA 010290020
ETA 110290000
√ (2 pcs)
X
√ (2 pcs)
X
ETA 210290000
√ (2 pcs)
√ (1 pcs)
√ (3 pcs)
X
√
Included
Not included
X
III. PREPARATION FOR USE
Remove all packing material and take out the blender. Remove all possible adhesion foils,
stick-on labels or paper from the appliance. We recommend washing the container before
using it for the first time. The knife section is treated with oil not harmful to health for
technological reasons. Therefore first fill in the container with warm water (max. 50 °C) with
a small amount of detergent. Hold the knife (on the bottom) at the plastic base and slide it
(with the blade down) to the hole in the filled container
B
, then turn it in the direction of the
maximum position. Then put the container on and run for 15 sec. Then rinse the container
and knife with clear water. Before the first use, wash the other parts that will be in contact
with food in hot water with a detergent, rinse thoroughly with clean water and wipe till dry, or
let dry The knife section is treated with oil not harmful to health for technological reasons.
Put the blender on a flat, stable, smooth and clean work surface at the height of at least
85 cm, out of reach of children and incapacitated people (see par.
SAFETY
WARNING
).
Make sure that the power cord is not damaged and that it does not lead through any sharp
or hot surfaces
.
GB
20
/ 39
Содержание 0102 90020
Страница 44: ...e č 014 2016 DATE 21 3 2016 ...