Plug power supply fork
A3
to the electric power. Possible short-time mild smoke when the
appliance is operated for the first time is not a defect and the appliance is not subject to
a complaint for this reason.
Warning
– If the dish is not fitted correctly on the propulsion unit, the safety switch will not allow
to put the motor in operation.
–
When the blender is in the state of idle operation, e.g. the blade fails to touch the foods,
unplug the unit until the foods have been relaxed.
–
Maximum time of operation is 60 sec., then leave the appliance rest and cool down for
approx. 2 min. If you process big amounts of food, divide them in separate portions so
that you keep) recommended times of operation and rest of the propulsion unit.
!
ACCESSORY INSTALLATION
(pic. 2
–
7)
Bowl assembly and distribution (B)
Put sealing
B1
on the contact surface of the plastic base of knife
B2
.
Hold the knife (on the bottom) at the plastic base and slide it (with the blade down) to the
hole in the filled container
B
, then turn it in the direction of the maximum position and tighten
with reasonable force. Remove the knife from the container in the opposite direction.
Warning
–
Check whether the sealing is put properly on its place in the bowl,
is clean and is not leakage of fluid
.
!
Attaching and removing the dish (B)
Mount the bowl
B
on drive
A2
so that it slides down, then secure it by turning it clockwise
tillyou hear a snapping sound (at the same time, safety lock is unlocked).
Pay special
attention to this operation
. You can remove the bowl in the opposite direction.
Switch (A1)
Start the drive by pushing the switch (the motor runs only for the time when the switch
is pushed). Push several times until you get the required result.
IV. USING THE BLENDER
The blender is perfectly for preparation fresh fruit drinks, fitness & protein drinks,
milkshakes, mixed alcoholic & non-alcoholic beverages, smoothies, but also for crushed
ice. Excellent for salsa sauces snack, etc., or to crush ice. After mounting of the assembled
blending bowl on the drive unit and after its filling with Ingredients.
Check whether is not leakage of fluid from containers!
Plug power supply fork
A3
to the electric power and control. When working, hold with one
hand the driving unit and press the switch with the other hand. Choose the amount of the
processed food so that the maximum volume of the containers marked with the gauge line
is not exceeded. Bigger amount of processed food has to be divided into several doses and
the volume of the containers has to be checked regularly. After finishing work, disconnect
the appliance from power supply by taking the connector of power cord
A3
out of the
electric socket. Unscrew the knife
B2
and replace it with the jar cover
C
. If you open the
cap
C
, you can drink directly from the jar. Food preparation (processing) times are only
approximate, they depend on the amount, the kind and the quality of used ingredients and
they range in seconds to minutes (see the table)
.
21
GB
/ 39
Содержание 0102 90020
Страница 44: ...e č 014 2016 DATE 21 3 2016 ...