4
GB
Congratulations on your purchase of this high-quality ESYLUX product. To ensure proper operation, please read these user instructions carefully
and keep them for future reference.
1 • SAFETY INSTRUCTIONS
CAUTION: work on the 230 V power system must be carried out by authorised personnel only with due regard to the applicable
installation regulations. Switch off the power supply before installing the system.
Use this product only as intended (as described in the user instructions). Changes or modifications to the product or painting it will result
in loss of warranty. You should check the device for damage immediately after unpacking it. If there is any damage, you should not install
the device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed, you should turn the device off immediately and make sure that it
cannot be operated unintentionally.
Caution: Proceed with care when installing the LED floodlight as it can get very hot!
NOTE: this device must not be disposed of as unsorted household waste. Used devices must be disposed of correctly.
Contact your local town council for more information.
2 • dESCRIPTION
ESYLUX LED SPOT contains lights, including LED illuminants, and is suitable for wall mounting.
3 • INSTALLATION / ASSEMBLY / CONNECTION
Before installing the device:
• Switch off the power supply.
• The LED SPOT should only be installed on a stable, flat surface (wall)
(fig. 1)
.
Thread the cable through and attach the wall base vertically in the required position
(fig. 2)
. Connect the LED SPOT according to the
circuit diagram
(fig. 3)
. Adjust the lamp base and tighten with screws (not included)
(fig. 4)
. Mount the lightning fixture on the wall base
and tighten the screw
(fig. 5)
.
4 • ESYLUX MANUFACTURER’S GUARANTEE
ESYLUX products are tested in accordance with applicable regulations and manufactured with the utmost care. The guarantor,
ESYLUX Deutschland GmbH, Postfach 1840, D-22908 Ahrensburg, Germany (for Germany) or the relevant ESYLUX distributor in
your country (visit www.esylux.com for a complete overview) provides a guarantee against manufacturing/material defects in
ESYLUX devices for a period of three years from the date of manufacture.
This guarantee is independent of your legal rights with respect to the seller of the device.
The guarantee does not apply to natural wear and tear, changes/interference caused by environmental factors or damage in transit,
nor to damage caused as a result of failure to follow the user or maintenance instructions and/or as a result of improper installation.
Any illuminants or batteries supplied with the device are not covered by the guarantee.
The guarantee can only be honoured if the device is sent back with the invoice/receipt, unchanged, packed and with sufficient postage
to the guarantor, along with a brief description of the fault, as soon as a defect has been identified.
If the guarantee claim proves justified, the guarantor will, within a reasonable period, either repair the device or replace it. The guarantee
does not cover further claims; in particular, the guarantor will not be liable for damages resulting from the device’s defectiveness. If the
claim is unfounded (e.g. because the guarantee has expired or the fault is not covered by the guarantee), then the guarantor may attempt
to repair the device for you for a fee, keeping costs to a minimum.
INSTALLATION AND OPERATING INSTRUCTIONS
GB
