Esu LokPilot Fx V4.0, Инструкция по эксплуатации

Страница: 18 / 76

18
6.8.5. Colour Coding by Märklin®
Märklin® uses a different colour coding system compared to the
DCC colours. Please refer to figure 13 for more information.
6.8.6. Motor and track connections
Firstly, please cut all wires installed in the locomotive. Take special
care to remove any connections to the chassis (ground): the motor
leads must be positively potential-free, in other words they may
not have any contact to the chassis or body or the wheels and
wheel contacts.
It is particularly easy to overlook such connections in Fleischmann®
locomotives.
Make notes of which motor lead connects the motor with the
right and the left wheel contact.This avoids mistakes and assures
that your locomotive runs in the right direction.
Please check all connections with an Ohmmeter. Search for
short circuits, particularly between the motor leads and the
wheel contacts.
Connect the red wire to the right rail pickup or the centre pick •
up in AC models.
Connect the black wire to the left rail pickup or the chassis in
•
AC models.
Connect the orange wire with the motor terminal, which originally
•
lead to the right wheel pick up (centre pick up in AC models).
The grey wire goes to the terminal, which originally connected to
•
the left rail (chassis for AC models).
6.8.6.1. Connecting DC and Coreless Motors
You may use all DC motors commonly used for model trains pro-
vided they do not exceed the current limit of the decoder.
In some cases with the 5-pole High Performance Drive by Märk-
lin®, you may find three anti-interference capacitors.
The two capacitors connected directly to the motor leads and the
motor housing MUST be removed (also refer to Fig. 14).
Installing the Decoder
Description Märklin® colour
ESU colour (NMRA
DCC Norm)
AC: Power pick up show (Center rail)
DC: Right track connection red red
AC: Outside rails
DC: Left track connection brown black
eft motor terminal blue orange
Right motor terminal green grey
Common (rectified track voltage) (+Pole) for
function outputs
orange blue
Function output Rearlight yellow yellow
Function output Headlight grey white
Function output AUX1 brown/red green
Function output AUX2 brown/green violet
Function output AUX3 brown/yellow -
Function output AUX4 brown/white -
Colour coding by Märklin® in contrast to the DCC wiring code Figure 13: