Estella 236ECEM1, Руководство пользователя, Страница: 3 / 15

2
1 . This is an electric machine user manual, in which operation, maintenance and safety information are
specified . Please read and file it carefully .
2 . After unpacking, please check to ensure your machine has not been damaged during shipping .
Please notify your service representative or qualified technician regarding all questions or concerns
before installing . Please note that the machine package material, including plastic bag and Styrofoam,
can be dangerous and should be kept out of reach of children .
3 . There is an identification label on the front of unit . Before operating, please check to ensure the power
source corresponds to the rating shown on the identification label . The manufacturer is not responsible
for issues resulting from improper installation and usage .
4 . Please use separate power source which corresponds to the unit’s power rating .
5 . Please use No Fuse Breaker (NFB) that conforms to the safety regulation separately . Do NOT use a
socket . The NFB should have a minimum contact space of 3 mm and provide electrical spike and drain
protection . The ampere must be sufficient for providing the required electric current to this machine .
6 . Be sure to use a grounded power source to prevent electric shock and ensure the safety of this machine
and relative personnel .
7 . The machine must be used in accordance with its original design . Additional use is inappropriate and
dangerous . Injury or loss caused by wrong use or operation mistake will be beyond our responsibility .
8 . The temperature of the steam wand, hot water wand and brewing group is very high . Use caution while
operating .
9 . Please follow maintenance and cleaning instructions specified in this manual to ensure the best operation
efficiency of machine .
10 . If the machine breaks down or functions abnormally, please turn off machine and its power source and
notify professional maintenance personnel to fix; Electrical components can be dangerous . We are not
responsible for the behavior conducted by unauthorized service personnel .
11 . Please use filtered and softened water . If using groundwater or tap water for brewing coffee, please
soften it first . Unsoftened water will decompose dissolvable minerals and turn to limescale after boiling .
The limescale will reduce the machine’s thermal efficiency and machine’s lifetime .
12 . Machine refills water automatically . The light on touch panel will flash as self-detection if water flow into
machine exceeds two minutes (see Trouble Shooting Section), and power will be cut off automatically to
protect the system . To resume normal functions, turn off the machine for 2-3 seconds and turn on the
machine again .
13 . The heating element will not operate when water in the machine is less than the minimum required level .
When starting the machine without any water in the tank, heating will be delayed for about 60 seconds .
14 . Before the use of machine, you must confirm there isn’t any frozen water inside the boiler . Even though
the machine hasn’t been installed, the temperature for water must be kept over the freezing point . The
damage caused by frozen water inside the tube or boiler won’t be covered by the manufacturer .
15 . Machine is shipped from factory with water drained from boiler and exchanger . Please ensure the
machine to be drained completely before it is removed and put away for storage . If water gets frozen
inside the pipes and boiler of the machine, it can damage machine . For install and removal of the machine,
please contact a qualified service person .
GENERAL