13
4
STAGE 4
"Timer programme" mode: (no ringing)
Touch the CLOCK&ALARM light "E" once; it will then shine green. The screen displays "01",
at the set time, the diffusion will begin accompanied by the luminous ambiance.
"Olfactory alarm clock" mode: (with ringing)
Touch the CLOCK&ALARM light "E" twice; it will then shine green. The screen displays "02";
at the set time, the diffusion and the luminous ambiance will begin accompanied by a ringing
tone that will last 1 minute and can be stopped by pressing the CLOCK&ALARM light "E" .
Note: if the water level is too low, the mist diffuser cannot function properly and will switch into
the standby mode at the end of the alarm.
5
STAGE 5
Starting the luminous ambiance:
To accompany the diffusion, you can enjoy a moving display of different colours.
Touch LIGHT "F" to start the luminous ambiance. It will stop automatically when diffusion stops.
You can stop the luminous ambiance at any time by touching LIGHT "F" or the ON/OFF light
"D" (the luminous ambiance and the diffusion stop).
• Thanks to the automatic stop system, you can enjoy the perfumed atmosphere without
worrying about the diffuser.
• During the diffusion, the height of the mist may vary.
• When the appliance is operating,
make sure not to put any obstacle above the
appliance
that could hamper the release of the mist and
not to remove the upper part
in order to avoid any splashing.
1
st
pr
ess
2
nd
pr
ess
3
rd
pr
ess
Setting the alarm clock time:
Touch the CLOCK&ALARM light "E" for 3-4 seconds to make your adjustments (the time
display and all the lights blink simultaneously).
• Touch the CLOCK&ALARM light "E" to set the correct hour and touch LIGHT "F" to
adjust the minutes.
• Touch the CLOCK&ALARM light "E" once again for 3-4 seconds to save the desired time.
The time is recorded without touching the lights after a few seconds.
CMP-146_NoticeDiffuseurBlackT_09-17_v1.indd 13
20/09/2017 16:19