14
po.org
MODEL: EST-MTB24G PRODUCT CODE: 705558 | MODEL: EST-MTB24B PRODUCT CODE: 705559 11/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
Assembly (Cont.)
Step 5: Installing the Pedals
WARNING!
• For safe operation, the pedal spindle must be securely tightened against the
crank arm.
• Always replace damaged pedals, and always wear fully enclosed shoes or
sneakers when riding a bicycle.
1. Look for the letters “R” or “L” stamped on the pedal spindle.
2. To install the pedals, proceed as illustrated below (Fig. 13):
– Thread the pedal marked “R” into the crank arm on the chain side of the bike.
Turn the pedal spindle in a
clockwise direction. Securely tighten the pedal
spindle.
– Thread the pedal marked “L” into the crank arm on the left side of the bike.
Turn the pedal spindle in an
anticlockwise direction. Securely tighten the
pedal spindle.
Torque requirements: 20–26 N·m.
NOTE: Both pedals should be tightened towards the front of the bicycle. Start
each pedal spindle by hand to avoid stripping the threads.
Fig. 13
