13
po.org
MODEL: EST-MTB24G PRODUCT CODE: 705558 | MODEL: EST-MTB24B PRODUCT CODE: 705559 11/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
Assembly (Cont.)
Step 4: Installing the Saddle
The saddle is pre-assembled to the seat post (Fig. 12).
1. Loosen the seat clamp, then insert the seat post into the bicycle frame, making
sure that the minimum insertion mark on the seat post is completely inserted
into the frame and not visible.
2. Tighten the quick release seat post binder bolt securely at the desired height.
Turning the tension adjustment nut clockwise while keeping the cam lever from
rotating
increases the clamping force. Turning it anticlockwise while keeping
the cam lever from rotating
reduces the clamping force. Less than half a turn of
the tension adjustment nut can make the difference between a safe and unsafe
clamping force.
3. Adjust the seat angle so that the top of the seat is parallel to the ground and
comfortable for the rider.
4. Close the clamp.
IMPORTANT!
Pay special attention to the insertion
warning mark.
Test the seat to pedal distance by having
the rider sit on the seat. When the rider's
leg is slightly bent, the ball of the foot
should rest on the pedal when it is in its
lowest position and the feet of a seated
rider can reach the ground. If it does not,
adjust the seat height as necessary.
Check for tightness by attempting to twist
the seat. If the seat is loose, be sure to
tighten the clamp nut and binder bolt nut
securely.
Fig. 12