![background image](http://html.mh-extra.com/html/estate/est-mtb24b/est-mtb24b_instruction-manual_2429203012.webp)
12
po.org
MODEL: EST-MTB24G PRODUCT CODE: 705558 | MODEL: EST-MTB24B PRODUCT CODE: 705559 11/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
Assembly (Cont.)
Step 3: Assembling the Stem and Handlebars
WARNING!
For safe operation, the clamp bolts must be
tightened securely. If you can move the handle-
bar forward or backward, the bolts are not tight
enough. Take care not to overtighten and damage
the handlebar stem pillar bolt, which could cause
injury to the rider.
1. Loosen the screws on the stem and remove the stem cover (Fig. 8).
2. Fit the handlebars to the stem, ensuring they are centered. Replace the stem
cover and partially tighten the screws. Check the handlebars are in the correct
position and once satisfied, fully tighten the screws (Fig. 9).
3. The steering stem is supplied assembled, but
if you wish to make any adjustments, loosen
the screws as shown, and after the stem is in
the correct position, tighten the screws again
(Fig. 10).
Pedal speed changing
The bike is equipped with a SHIMANO 7
speed system and the shifter is at the right
side of the handlebar.
Turn the shifter for a different tooth ratio in
order to change the pedal speed (Fig. 11).
Fig. 8
Fig. 9
Fig. 10
Fig. 11