EST 246, Руководство по эксплуатации

Страница: 6 / 24

6
EST 246
p
rotection during Work
When spraying and manipulating application materials and when
cleaning the equipment, follow the instructions of the producers of
these materials. To protect the skin and eyes, use protective work
aids (clothes, gloves, respirators, protective masks, breathing
devices, protective glasses, protective creams, etc.).
USE AND DESCRIPTION OF EQUIPMENT
Air sprayer EST 246 is a sprayer with a lower pressure supply of
material. The sprayer has a complete stainless route for the applied
material.
The system for spraying with decreased pressure of the spraying
air to the mouth of the nozzle of the sprayer, similar to PR system,
is designed for the application of a wide range of applied materials
by air spraying in the industry, car varnishing workshops, plastic
industry, wood processing, ceramic industry, particularly for the
application of base paints, enamels and glazing where an increased
output of the sprayer is necessary.
This sprayer is characterized by excellent holding and balancing
in the hand, as well as easy and less tiring manipulation. Assembly
threads 6, 7 and 23 are sealed by a suitable sealing binder (LOCTITE
542).
Using the sprayer, it is possible to apply all types of coating
substances which are designated for the application of spraying and
their chemical composition does not intervene into the parts of the
sprayer. The recommended distance from the mouth of the jet from
the sprayed area (spraying distance) depends on the size of the jet
set and the type of coating substance, which is 150-190 mm.
The semi-automatic seal on the needle ensures the
maximum time of maintenance-free and reliable activity
of the seal. Mechanical tightening of the seal enables the
prolongation of the time between vertical repairs. The system
connects the advantages of the automatic and mechanical
solution for tightening the seal on the needle.
s
prayer
est 246
Using this type of the sprayer, it is possible to process the following
coating substances can be processed:
solvent-borne – synthetic, nitro, acetone, urethane, epoxy and
acrylic, base, fillers and upper varnishes
water-borne – acrylic, silicate, silicone and urethane substances
and other application materials with similar properties.
Working environment IE 72 according to ČSN – EN 60721-3-7.