Essilor Instruments AKR 800, Руководство пользователя, Страница: 58 / 81

Printer cover opened
The printer cover is opened.
Close the printer cover.
If this message remains displayed even after closing the cover,
contact your local distributor.
Do not attempt to repair it by yourself.
Printer overheated
The printer head is overheated.
Cut the power and stop using until the head cools off.
Consult your dealer immediately if the message appears again.
Do not try to repair by yourself.
Paper empty
There is no printer paper.
Set the printer paper appropriately.
Please reset the paper
The cutter or printer is not working normally.
Set the printer paper again.
If this message remains displayed even after that, contact your local
distributor.
Do not attempt to repair it by yourself.
LAN transfer error
Failure of data forward.
Check the settings regarding LAN connection.
LAN connection failure
Failure of communication with this device.
Check the connection between this device and PC.
If this message remains displayed even after that, contact your local
distributor.
Do not attempt to repair it by yourself.
USB-A transfer error
Failure of data forward to USB memory.
The USB memory in use might not be able to communicate with this
device.
Replace the USB memory, and try to communicate again.
USB-A connection failure
Failure of data forward to USB memory.
Check the connection between this device and USB memory.
If this message remains displayed even after that, contact your local
distributor.
Do not attempt to repair it by yourself.
Set ip fail
An invalid IP address is set. Network address, broadcast address, and
loopback address cannot be used.
Check the IP address settings.
Use a valid IP address
Network is unreachable
There is no transmission route to the network. This is caused by a
misconfigured routing.
Check the subnet mask and default gateway settings.
U
SER MANUAL
> E
RROR DISPLAY
AKR800 - Auto Kerato Refractometer > V4 - 05-2022 - CE0459 58