Fill fan shaft bearing with engine oil at oil cup "A" every 1000 miles. It is very important that the fan shaft has plenty of
lubrication at all times.
Miscellaneous
Throttle Control Rod
—Oil or grease all accelerator connections. Throttle linkage should work with a snap. Grease
choke wire occasionally to eliminate sticking.
Door Locks
—Apply a drop of engine oil occasionally to latch bar. Work several times to spread oil, then wipe off
excess.
Door Latch Striker Plate
—Saturate wick with motor oil.
Door Dovetails
—Saturate wick in male member with motor oil.
Door Hinges
—Open doors and drop light oil in each hinge oil hole, located under the top ledge of body portion of
hinge. Wipe off excess.
Hood Locks
—Lubricate occasionally with motor oil.
Adjustment
Engine Tuning
[Pg 9]
