background image

25

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

c. To change this User’s Code, enter the New User Code followed

by

 

#

 

(enter 

0

 

#

 if no code is assigned). To keep this User’s Code,

enter

 

#

.

d. Present card, or enter 

0 # 

 if no card is assigned, or enter 

#

 to

keep current card.

e. Then, enter the desired User Authorization, followed by 

#

.

(Repeat for additional authorizations or skip to Step f for no

authorizations.)

Code

User Authorization

1

Latching Authorization

2

Program or Delete Users Authorization

3

Output A Authorization (see notes)

4

2nd Door (see notes)

5

Output B Authorization (see notes)

6

3rd Door (see notes)

7

Exempt from Security Level restrictions (see notes)

f.

Enter 

#

 

to complete programming for this User.

g. To modify an additional User, return to Step b.
h. If no more Users are to be modified, enter  

*

  

 and return to Step

3 or if you have completed all User Programming, enter  

*

  

*

 

 a

second time to complete programming sequence and reset

system to normal operation.

!

 

Deleting a User by User ID

a. Enter  

5    #

b. Enter the User ID (1 to 500) for the User to be deleted, followed

by

 

#

c. To delete an additional User, return to Step b.
d. If no more Users are to be deleted, enter  

*

  

 

and return to Step

3, or if you have completed all User Programming, enter 

 

*

  

*

 

 a

second time to complete programming sequence and reset

system to normal operation.

Содержание Encoded Keyless Entry









































Отзывы: