Essentielb EMG3, Руководство пользователя

Страница: 13 / 31

25
ES
24
Agradecemos su confianza al adquirir un producto de la marca Essentiel b.
Prestamos especial atención a la
FIABILIDAD , a la SENCILLEZ DE USO y al
DISEÑO de nuestros productos.
Esperamos que esta máquina de cubitos de hielo sea de su entera
satisfacción.
índice
su producto 26
Contenido del paquete 26
Descripción del electrodoméstico 26
Características técnicas 27
Precauciones 27
Descripción del panel de control 28
antes del primer uso 29
uso 29
Producción de cubitos de hielo 30
Desarrollo de un ciclo 31
Conexión a una entrada de agua 32
consejos prácticos 32
mantenimiento y limpieza 33
Vaciado de la máquina 33
Limpieza del circuito 33
Limpieza de la máquina 34
En caso de no usar la máquina durante un tiempo prolongado 34
guía de solución de problemas 35
The ice cube tray full
indicator light
comes on.
•
The ice container is
full.
•
The diodes are
malfunctioning.
•
The ice cube recovery
flap is blocked.
1. Remove ice cubes.
2. Wipe the LEDs and
restart the appliance.
If the problem persists,
contact your retail
store’s customer
service department.
The water level
indicator light
comes on.
•
There is not enough
water.
or
•
The pump is
malfunctioning.
•
The appliance is
connected to a water
supply that is turned
off.
or
•
The appliance is
connected to a
water supply, but the
hose is not properly
attached.
1. Add water up to the
maximum level.
2. Press to restart.
If the problem persists,
drain the water from
the tank (refer to
"Maintenance and
cleaning").
or
Make sure that the hose
is properly attached
and that the water
supply is turned on (see
“Connection to water
supply” section).
The ice cubes produced
are too large or are
stuck together.
The water reservoir
temperature or room
temperature is too low.
Fill the water tank with
water between 8 and
25°C. If the problem
persists, shut off the
appliance and contact
your retail store’s
customer service
department.
The ice cube recovery
flap is blocked.
Power to the appliance
was cut off during a
cycle and small pieces
of ice formed on the ice
cube recovery flap.
1. Unplug the
appliance.
2. Push the flap back
slightly and remove the
pieces of ice.
3. You can restart the
appliance.
The appliance stops
working during
production
The ice cube tray is
incorrectly positioned.
Remove the ice cubes
and press . If the
problem persists,
contact your retail
store’s customer
service department.