V.1.0
V.1.0
24
use
25
assembling / disassembling of the appliance
use
•
Before using the vacuum cleaner, make sure that
the fi lter is correctly installed in the body of the
appliance. Refer to the paragraph "Cleaning and
Maintenance".
•
Never use the appliance without the fi lters and the
dust container!
On/off switch
“
Boost
”
function
1.
The vacuum cleaner has two speeds. Press the on / off button on the handle once (see
diagram above). The appliance will turn on and the charge indicator light will come on
briefl y.
2.
To increase the suction power in particularly dirty areas that require further cleaning, you
can activate the “Boost” function by pressing the “Boost” button.
3.
You have a battery life of 30 minutes at normal speed and 12 minutes using the “Boost”
function (when the battery is fully recharged).
4.
At the end of use, press the on / off button to turn off the appliance.
5.
If necessary, empty and clean the dust container and the fi lter unit (see section “Cleaning
and Maintenance”).
6.
Place the vacuum cleaner on the stand to recharge it.
Put the roller of the motorized brush back on
1.
Using a coin, rotate the locking screw to the
(unlocked) symbol to remove the
locking tab (see diagram below).
2.
Grab the roll.
3.
Place the other roll on the drive shaft following the shape of the notch, put the locking
tab back, and put the lock screw back to the
(locked) symbol.
Locking
screw
Locking tab
