Installation Method Alternatives
Care@Home™ Flood Detector User Guide
15
Using Screws
You have the option of installing one or both units using screws.
Required Equipment
Before beginning, prepare the following equipment:
A drill with a standard appropriate bit
Four 3 X 35 DIN 7982 C screws and wall anchors for the screws - The screws and wall anchors
are not provided.
A standard Philips screwdriver
Installing the FL with Screws
To install the transmitter using screws:
1.
Using a screwdriver, clear the two holes in the mounting base for the screws.
Figure 11: Mounting Base with Screws
2.
Place and hold the mounting base on the desired mounting location.
3.
Mark the drilling spots through the screw holes.
4.
Drill the holes.
5.
Insert two wall anchors in the drilled holes, if needed.
6.
Place the mounting base over the wall anchors in the drilled holes.
