Installing the FL
8
Care@Home™ Flood Detector User Guide
10.
Using a cutter tool, remove one of the tabs on the back of the mounting base according to where
you want to put the cable.
Figure 6: Remove One Tab
11.
Peel off the protective strip from the mounting tape on the transmitter.
12.
Ensuring that the cable is in the appropriate slot and does not prevent the mounting base from
being fully attached to the mounting location, press the transmitter into place.
Figure 7: Ensure Cable is in the Slot
13.
Peel off the protective strip from the mounting tape on the flood sensor.
14.
Press the flood sensor into place.
