12/5/2006
EIG-8O Gateway Administration Guidelines
MAG-06008 Rev. A
All Wildcard
In the
All Wildcard
field select yes or no to indicate if EIG-8O will put the fixed prefix when it registers
(such as
：
*). If Wildcard and All Wildcard are yes, the gateway will deal with all wildcard.
End-of-Line Using
In the
End-Of-Line Using CR
field select yes or no to indicate if EIG-8O will use CR as line stop
symbol when sending messages. If set to no, CRLF will be used.
Quarantine Default to Loop
In the
Quarantine Default to Loop
field, select
yes
or
no
to indicate how EIG-8O will handle events
when there is no response for requirements. If set to
yes
, gateway will report continuously all events of
this requirements when it receive a requirement. If set to
no
, gateway will response only when
required.
Default Package Don’t Send Name
In the
Default Package Don’t Send Name
field, select yes or no. If set to
yes
, the gateway will reply
to the default package without a package name. If set to
no
, it will reply to the default package with a
package name.
Always Enable 1st Digit Timeout
In the
Always Enable 1st Digit Timeout
field, select
yes
or
no
to indicate how EIG-8O will handle
events when there is no timeout during the required time. If set to
yes
, the gateway will report timeout
according to the settings when the caller does not dial a phone number after going off-hook.
Onhook don’t Delete Connection
In the
Onhook don’t Delete Connection
field select
yes
or
no
. If you select
yes
, the gateway will
delete the connection when the caller does not go on-hook. If you select
no
, the gateway will wait for
the call agent to delete the connection.
Notify Instead of 401/402
In the
Notify Instead of 401/402
, select
yes
or
no
. If you select
yes
, the gateway will use notification
message instead of 401/402 message.
Using L Package Handle FXO
In the
Using L Package Handle FXO
field select yes or no. If you select
yes
, the gateway will treat
FXO as FXS. If you select
no
, it will handle FXO and FXS in different ways.
Using Configured Digit Map
In the
Using Configured Digit Map
field select
yes
or
no
. If you select
yes
, the gateway will invoke
the dialing rule. If you select
no
, it will use the rule of soft-switch.
17
