12/5/2006
EIG-8O Gateway Administration Guidelines
MAG-06008 Rev. A
1.
For allocating one UDP port for the purpose of registration and making call:
Select
Gateway Register mode
, set
No
to
SIP Multi Ports
, and enter
SIP PORT
field.
2.
For allocating one UDP port for the purpose of registration and allocating UDP ports for each
individual line (FXS port):
Select
Gateway Register mode
, set
Yes
to
SIP Multi Ports
, and enter
SIP PORT
field, enter
SIP Local Port
in
section 4.9.
3.
For allocating UDP ports for each individual line for the purpose of registration and making calls:
Select
Endpoint Register mode
, set
Yes
to
SIP Multi Ports
, and enter SIP PORT field, enter
SIP Local Port
in
section 4.9.
4.
Registration is per line and port for making call is gateway:
Not supported.
4.11.6
Advanced IMS Options
This Option is only for EIG-8O 1.9.3 Series.
Click the
Advance Config
link on the left side of Figure 6, and then click
IMS Config
. The IMS
Optional screen displays.
Figure 29. IMSOptional screen
IMS
Set number
1
(enable) or number
0
(disable). When IMS is disabled, SIP messages flows and formats
are compliant with RFC 3261; when IMS is enabled SIP message flows and formats are compliant with
IMS/TISPAN.
47
