Essel Technology RFID A1 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 60

Essel Technology RFID A1 Скачать руководство пользователя страница 23

23

Depending upon the command, different arguments are taken as parameters and various registers are modified.
After each command execution, the Result Register is updated.

4.2.1

Get UID and Type (0x01)

The ‘Get UID and Type’ command

takes no arguments. After receiving this command, the RFID A1 Module checks for

any tag presence in the field. If there is no tag in the field, it returns ‘No Tag’ value in the ‘Tag Type Register’. If

there is a tag in the field, it reads its UID and type and writes it to Tag UID and Tag Type registers. The

‘UID Size

Register’ together with the ‘Result Register’ are up

dated also. This command must always be executed first before

any other command to turn on and initialize the tag. Additionally, this command must be executed after any error
when doing any operations on a tag to reset the tag and to enable it to be able to respond to further command
requests.

«
...
21
22
23
24
25
...
»

Содержание RFID A1





























































Отзывы:

Нет отзывов