Esse-ti 4GRouter, Руководство пользователя

Страница: 39 / 60

Page 39
PROGRAMMING VIA TELEPHONE
TELEPHONE
LINE VOLTAGE
(TEL
TERMINALS)
**61*X#
X: option, from 0 to 3
0= 36 Vdc
1=
52 Vdc
2= 36 Vdc with line polarity reversal
3= 52 Vdc with line polarity reversal
USE MODE **2X#
X: option, da 1 a 4
1=
default
2= mode recommended for autodialers or other
devices effecting tone detection over the line
3=
mode recommended to reduce echo occurring
during conversation
4=
mode recommended to reduce echo in case of
connection with devices effecting tone detection
over the line
INTER-DIGIT
DIALLING TIME
**8*X#
X:
seconds, from 1 to 9; 0=10 seconds
5 factory default
CLIP SETTING
**7*1*GGMMAA*HHMM#
Activation
GG: day, MM: month, AA: year;
HH: hour, MM: minutes
**7*0# Deactivation
Default: disabled (call date and time not displayed)
CLIR SETTING
**6*X#
X: option, from 0 to 2
0=
the sending of your number to the called
user depends on the settings of the
telephone operator
1= your number is not sent to the called user
2= your number is sent to the called user
**16# Your number is not sent for a single call
**17# Your number is sent for a single call
ROAMING
SETTING
**5*1# Enabling
**5*0*XXX*Y ... Y#
Disabling
XXX: MCC of your telephone operator
Y…Y: MNC of your telephone operator
(in case 4GRouter registers with a different provider
than the programmed, it is not possible to make or
receive any calls)
Default: roaming enabled