Esse-ti 4GRouter, Руководство пользователя

Страница: 34 / 60

Page 34
Source Nat
Allows to create rules to modify the source of the outgoing packets, in
order to assign the traffic to areas or WAN gateways in NAT mode
Name Allows to set the name of the rule
Source zone Allows to select the traffic source area
Destination zone Allows to select the traffic source destination
To source IP
Allows to select the IP address (that will become source) on which
remap the outgoing traffic (select
custom o enter a new IP address /
select Do not rewrite to not modify it)
To source Port
Allows to select the port (that will become source) on which remap the
outgoing traffic
Page for the rule customization
Rule is
enabled/disabled
Allows to enable/disable the use of a rule
Name Allows to set the name of a rule
Restrict to
address family
Allows to select the IP protocol version
Protocol Allows to select the communication protocol
Match ICMP type Allows to define the correspondence with an ICMP message type
Source zone Allows to select the traffic source area
Source MAC
address Allows to select the MAC address of the traffic source area (select
custom to enter a new MAC address)
Source address
Allows to select the IP address of the traffic source (select custom to
enter a new IP address)
Source port Allows to enter the port of the traffic source
Destination zone Allows to select the traffic destination zone
Destination
address Allows to select the IP address of the traffic destination (select custom
to enter a new IP address)
Destination port Allows to insert the traffic destination port
SNAT IP address
Allows to select the IP address (that will become source) on which
remap the outgoing traffic (select
custom to enter a new IP address /
select Do not rewrite to not modify it)
SNAT port
Allows to select the port (that will become source) on which remap the
outgoing traffic
Action Allows to select the action to be done over the rule
Extra arguments Allows to insert extra IP table arguments (expert user)
Week Days Allows to select the days of the week for the rule’s validity
Month Days Allows to select the days of the month for the rule’s validity
Start Time
(hh:mm:ss)
Allows to enter the start time of the rule's validity