Esse-ti 4GRouter, Руководство пользователя

Страница: 38 / 60

Page 38
GATEWAY CONFIGURATION
It is possible to configure 4GRouter locally via a multi-frequency telephone or
remotely via SMS.
P
ROGRAMMING VIA TELEPHONE

Connect 4GRouter to a multi-frequency telephone using TEL terminals (F
in the picture at page 9).

Lift the handset and dial the desired programming code (see table
"Programming via telephone").
Note: at the end of each programming carried out correctly, you will
hear a confirmation tone, while an error tone will be heard in
case of error. In any case, the dialling tone will follow, after
which you can proceed with the programming or make a call.
Note: during programming, the inter-digit dialling time must not
exceed 5 seconds (see programming “Inter-digit dialling
time”). Once 5 seconds has elapsed without digits you will hear
the dissuasion tone and you will have to wait the dialling tone
or to hang up.
Note: programming can be carried out even if the signal is absent.
After the confirmation or the error tones, the dissuasion tone
will follow, after which you can proceed with programming or
hang up.
Note: in the table “Programming via telephone” factory default
values are highlighted in bold .