Esse-ti 4G.next Voice, Руководство пользователя

Страница: 26 / 52

Page 26
P
ROGRAMMING VIA
SMS
Programming via SMS is possible by any mobile phone or other device
supporting SMS. In case the administrator number has been previously
set, programming via SMS is only allowed from such telephone number.
An SMS notifying that programming has been completed will be sent
back by the gateway to the same telephone number that forwarded the
programming SMS.
WARNING
Programming outgoing SMS from the Internet may
not be successful if the requested format is not
respected.
Message format
The message format is required to be as follows:
ET-IL2*xxx#c..c#
where:
ET-IL2
programming string start
*xxx# password string (default xxx = 0)
c..c programming string as per table below
# separator character or end string character
Programming Code (x..x)
Telephone line voltage 61*X
Reading telephone line voltage 61R
Country setting 09*X…X
Reading country setting 09R
Line tones setting 2X
Reading line tones setting 2R
Inter-digit dialling time 8*X
Reading inter-digit dialling time 8*R